Download here: http://xxsurl.com/7pncqm
This video is about fixing the problem of turn signals fill with water
The reason for that is the heat from the light bulbs crack the top of the fixtures because they're always on when the engine is running, Cracks on the top lets water in but not out, the fix that worked for me, I drilled three 1/8 inch holes at the bottom of each housing, and sealed the cracks on the top with duct tape, Works fine, no more changing bulbs due to water in the housing, also the holes keep it cooler Here is how I did it :
Safety First :
Raise the car on jack stands or Ramps like what I am doing here ,
Unscrew two 10mm bolts to open the trap door,
Take the light bulb out of the way,
Unscrew two 7mm head screws that hold the fixture ,
Take the fixture out and drill three holes at the bottom and apply duct tape on the top to seal the crack, that should fix the problem
No comments:
Post a Comment